- 广东省产品服务专线
4000-5000-86
- 在线客服
- 广东省技术支持专线
0755-88844493
For comminution of dry, soft to medium-hard, sample materials as well as fibrous materials and plastics as well as for sample preparation according to RoHS.
Max. feed size: 70 x 80 mm
Areas of application
For the comminution of plastics, rubber, films, leather, fabrics, fibres, wood, leaves, roots, animal fodder, grain, maize, peat, tobacco, paper, cardboard, derived fuels, metal-free waste, household waste, composites, glass LCD’s and keypads of mobile phones, electronic chips, circuit boards, coal, bones, horn, dragées, tablets, cork, drugs, heterogeneous materials, malt, pasta, herbs, spices, dried meat and straw - which can be added at full length.
In addition, the Universal Cutting Mill PULVERISETTE 19 can also be used in the pharmaceutical or animal feed industries, in dental, medical and metallurgy technology, at veterinary institutes and for RoHS testing.
Method of operation
In the grinding chamber of the Universal Cutting Mill, a rotor fitted with knives comminutes the grinding sample in combination with three fixed knives.
Features overview
- Fast, reproducible comminution thanks to the high cutting rotor speed (2800 rpm)
- Different rotors for adapting the cutting performance to the sample
- Cutting rotor and sieve cassette can be removed and replaced without tools
- Cutting gap can be adjusted externally
- Housing and cover open up completely
- Smooth, easy-to-clean grinding chamber inner walls
- Certified safety (CE mark) and 2-year warranty
Equipment
Required accessories for the Power Cutting Mill PULVERISETTE 19 can be ordered according to your demands:
- Standard funnel for long and bulk solids or protected funnel with sample pusher
- Standard rotor with V-cutting edges and fixed knives made of tool steel, hardmetal tungsten carbide or chromium-free tool steel or rotor with straight cutting edges and fixed knives made of tool steel or chromium-free steel or disk milling cutter rotor with indexable inserts and fixed knives made of hardmetal tungsten carbide
- Sieve inserts with trapezoidal or square perforation in stainless steel 316 or chromium-free steel ST12
- Collecting vessel, 3 litres, or collecting vessel for large quantities, 10 litres
- Universal support stand is optional
- Sample exhaust system with Cyclone separator is also optional
Voltage/connection values: | 400V/3~ * |
Frequency: | 50-60 Hz * |
Input Power: | 2000 W * |
Operating principle: | Cutting |
Grinding tools: | Cutting rotor |
Materials of the grinding tools: | Tool steel, hardmetal tungsten carbide, chromium-free steel |
Rotor speed: | 2800 - 3400 rpm |
Feeding: | Batch-wise/continuous |
Max. feed size: (depends on material and funnel) | 70 x 80 mm |
Min. sample quantity: | 20 - 30 ml |
Max. throughput quantity: (depends on material and sieve size) | 60 l/h |
Final fineness: (depends on sieve insert) | 0.20 - 6 mm |
Dimensions: (W x D x H) | Table mounted or on stand 44 x 55 x 63 cm |
Weight: | 56 kg |
*Instrument available in the following voltages | 230 V/1~ / 50-60 Hz, 2200 W
Order Nr. 19.1020.00 |
100-120 V/1~ / 50-60 Hz, 1850 W
Order Nr. 19.1010.00 |
Suitable for the following material samples
medium-hard, soft, brittle, tough, fibrous samples
Accessories
Please note: For this FRITSCH Cutting Mill, you require a feed funnel, a cutting tool set, at least one sieve cassette and a collecting vessel.
Feed funnels
Collecting vessels
Cutting tool sets made of tool steel and hardmetal tungsten carbide
Sieve cassettes made of stainless steel 316
Accessories for chromium-free comminution - Cutting tool sets made of chromium-free tool steel
Sieve cassettes made of chromium-free steel ST12
Sample exhaust system with cyclone separator
Further accessories