- 广东省产品服务专线
4000-5000-86
- 在线客服
- 广东省技术支持专线
0755-88844493
Suitable for comminution of medium-hard, brittle materials up to a Mohs hardness of 6.
Areas of application
Soft substances:
Needles, leaves, grain, resins, cellulose, chemicals, dried fruits, peat, seeds, dried plants
Medium-hard substances:
Animal feed, salts, pellets, coal, porcelain clay, spices, gypsum, drugs, potash, tablets, slag, minerals, ash, stone and soils (bauxite, limestone, dried clay, etc.), synthetic resins, pyrite, cement clinker, coke, ores, refractory materials.
Method of operation
Comminution in the Cross Beater Mill takes place through impact, friction and shearing forces.
Features overview
1.1 kW brake motor, 2850 rpm with maintenance-free direct drive
Toothed grinding tools of cast iron
Collecting vessel of stainless steel
Bottom sieves of stainless steel with trapezoidal and round perforation
Housing of cast aluminium
Fast clamping grinding chamber
Inexpensive, easy-to-replace impact plates
For table mounting or free standing
2-year warranty
Equipment
The Cross Beater Mill PULVERISETTE 16, article number 16.3030.00 is equipped with a grinding insert made of cast iron. A 5 litre collecting vessel with filter hose is also included. The bottom sieve must be ordered separately. Also available are bottom sieves made of stainless steel in various sizes and perforations and for the comminution of large quantities a special 30 litre collecting vessel with filter hose can be ordered.
The Cross Beater Mill PULVERISETTE 16 is also available with a grinding insert made of stainless steel, which is harder.
Further information on the PULVERISETTE 16 with a grinding insert made of stainless steel
Demo-Film: View the PULVERISETTE 16 in action.
Voltage/connection values: | 400V/3~ * |
Frequency: | 50 Hz * |
Input Power: | 1480 W * |
Operating principle: | Impact |
Grinding tools: | Cross beater |
Materials of the grinding tools: | Cast iron |
Rotor speed: | 2,850 rpm |
Feeding: | Batch-wise/continuous |
Max. feed size: (depends on material) | 20 mm |
Min. sample quantity: | 30 - 40 ml |
Max. throughput quantity: (depends on material and sieve size) | 80 l/h |
Final fineness: (depends on sieve insert) | 0.12 - 10 mm |
Dimensions: (WxDxH) | Bench top instrument or on stand 42 x 45 x 56 cm |
Weight: | 38 kg |
*Instrument available in the following voltages | 230 V/1~, 50 Hz, 1590 W (Order Nr. 16.3020.00) |
110 V/1~, 60 Hz, 1250 W (Order Nr. 16.3010.00) | |
The PULVERISETTE 16 with voltage of "/3~" can only be operated on a three-phase supply network! Other voltages on request! |
Suitable for the following material samples
medium-hard, brittle
Accessories
Please note: For this FRITSCH mill, you require at least one bottom sieve.
Bottom sieves of stainless steel
Further accessories
Grinding set selection aid for the PULVERISETTE 16
General specifications
Material | Cast iron – GG20 0.6020 | Stainless steel – 1.4312 |
ISO/EN/DIN | EN-GJL200 | Code X8CrNi 18 12 |
Abrasion resistance | Moderately good | Moderately good |
Used for | Medium-hard, brittle samples | Medium-hard, brittle samples |
Chemical composition
Element | Share % | Share % |
Iron – Fe | 93.6 | approx. 65 |
Carbon – C | 3.650 | 0.03 |
Silicon – Si | 1.800 | 1 |
Manganese – Mn | 0.550 | 2 |
Phosphorus – P | 0.30 | 0.045 |
Sulphur – S | 0.100 | 0.030 |
Chromium – Cr | 16.5-18.5 | |
Molybdenum – Mo | 2.00-2.50 | |
Nickel – Ni | 11.00-14.00 |
Physical and mechanical properties
Density | 8.2 g/cm³ | 7.85 g/cm³ |
Hardness | 7.1 | 150 – 200 HB |