LABORETTE 24 带U形进料槽振动进样机与LABORETTE 24 带U形进料槽振动进样机的区别分析
LABORETTE 24 带U形进料槽振动进样机与LABORETTE 24 带U形进料槽振动进样机的区别分析：
LABORETTE 24 带V形进料槽振动进样机
For slow, measured feeding to achieve a narrow, directed sample discharge of free-flowing materials.
Areas of application
Slow, measured feeding of free-flowing material to obtain a narrow, directed sample feeding for a wide range of applications, such as for sample dividers, mills, mixers, scales.
Combinable with the Rotary Cone Sample Divider LABORETTE 27 and the Variable Speed Rotor Mill PULVERISETTE 14 for ensuring continuous and precisely measured feeding of the sample.
Method of operation
Through vibration of a channel of stainless steel, free-flowing material is conveyed out of a funnel and to the open end of the channel in a uniform stream.
The rate of flow can be controlled individually with a separate control device by modifying the vibration amplitude of the channel.
Control of the vibration amplitude is performed by a microprocessor-controlled control unit with which even the smallest quantities of material can be conveyed with absolute uniformity.
Features overview
- As a standard, with polished stainless steel channel and funnel, PTFE-coating on request
- Precisely controlled by microprocessor control with interface
- Extensive choice of flow rates for smallest and largest quantities
- Suitable for both coarse and fine materials
- Simple to clean due to easily removable components
- Small footprint
- V-shaped and U-shaped channels easy to interchange
- Maintenance-free electromagnetic drive and components
- Recyclable, compact cast housing
- Separate control unit
- Low energy consumption, only 0.1 kW drive power
- Certified safety (CE mark)
- 2-year warranty
Equipment
The standard equipment delivered with the Vibratory Feeder includes the wide V-shaped channel, funnel and control unit, but does not include a support frame, which must be ordered as an accessory, if needed. The V-shaped channel can be easily replaced with the U-shaped channel for uniform, wide material feeding.
| Voltage/connection values: | 200-240 V/1~ *
100-120 V/1~* |
| Frequency: | 50-60 Hz |
| Power consumption: | 20 W |
| Dimensions: (W x D x H) | Bench top instrument 44 x 14 x 34 cm |
| Net weight: | 12 kg |
| *Please note the corresponding order number with the available voltage/ connection values | 100-120 V/1~, 50-60 Hz
Order Nr. 24.0040.00 |
| 200-240 V/1~, 50-60 Hz
Order Nr. 24.0030.00 |
Accessories
Please note: The FRITSCH Vibratory Feeder with V-shaped channel is
delivered with funnel and control unit, but without stand, which can be
ordered as an accessory, if needed.
FRITSCH also offers a Vibratory Feeder with an U-shaped channel for achieving an even, wide sample feeding.
Additional information on LABORETTE 24 with U-shaped channel
Accessories for automatic feeding
LABORETTE 24 带U形进料槽振动进样机
For slow, measured feeding to achieve a uniform, wide sample feeding of free-flowing materials.
Areas of application
Slow, measured feeding of free-flowing material to obtain a uniform, wide sample feeding for a wide range of applications, such as for sample dividers, mills, mixers, scales.
Method of operation
Through vibration of a channel of stainless steel, free-flowing material is conveyed out of a funnel and to the open end of the channel in a uniform stream.
The rate of flow can be controlled individually with a separate control device by modifying the vibration amplitude of the channel.
Control of the vibration amplitude is performed by a microprocessor-controlled control unit with which even the smallest quantities of material can be conveyed with absolute uniformity.
Features overview
- As a standard, with polished stainless steel channel and funnel, PTFE-coating on request
- Precisely controlled by microprocessor control with interface
- Extensive choice of flow rates for smallest and largest quantities
- Suitable for both coarse and fine materials
- Simple to clean due to easily removable components
- Small footprint
- V-shaped and U-shaped channels easy to interchange
- Maintenance-free electromagnetic drive and components
- Recyclable, compact cast housing
- Separate control unit
- Low energy consumption, only 0.1 kW drive power
- Certified safety (CE mark)
- 2-year warranty
Equipment
The standard equipment delivered with the Vibratory Feeder includes the wide U-shaped channel, funnel and control unit, but does not include a stand, which must be ordered as an accessory, if needed. The wide U-shaped channel can be easily replaced with a V-shaped channel for narrow, directed material feeding.
| Voltage/connection values: | 100-120 V/1~*
200-240V/1~* |
| Frequency: | 50-60 Hz |
| Power consumption: | 20 W |
| Dimensions: (W xD x H) | Bench top instrument 44 x 14 x 34 cm |
| Net weight: | 12 kg |
| *Please note the corresponding order number with the available voltage/ connection values | 100-120 V/1~, 50-60 Hz
Order Nr. 24.0010.00 |
| 200-240/V1~, 50-60 Hz
Order Nr. 24.0020.00 |
Accessories
Please note: The FRITSCH Vibratory Feeder with wide channel is delivered
with funnel and control unit, but without a stand, which can be
ordered as an accessory, if needed.
FRITSCH also offers a Vibratory Feeder with V-shaped channel for achieving a narrow, directed sample feeding.
Additional information on LABORETTE 24 with V-shaped channel
Accessories for automatic feeding
处理中......